Pressure switches in booster pumps

The invention of the pump itself was a major breakthrough for mankind. It significantly simplified the way to obtain normal water. With growing demands for a well balanced water supply, largely free from pressure fluctuations, and at the same time increasing demands on the power efficiency of buildings, pumps are now making their contribution as booster pumps. What their task is, how they function and what pressure switches do in the process is explained briefly and succinctly in this posting.
What exactly are booster pumps needed for?
A booster pump increases low water pressure and, with that, improves the flow rate. It provides an extra boost to bring the water pressure to the desired level. Booster pumps tend to be used in pipelines to increase the pressure therefore to move the liquid along to the next pump, and also for pumping in residential houses or large commercial buildings. An expansion vessel can extend a pressure booster system. Through the use of this expansion vessel, the water pressure is likewise stabilised and therefore improved.
Booster pumps functioning
The figure gives a synopsis of the different measuring points inside a pressure booster system:
1 Input pressure ? Genius ? Pressure
2b Dry run protection ? Level
3 Output pressure ? Pressure
4 Pump performance ? Differential pressure
So how exactly does a booster pump work?
Booster pumps are selected predicated on application demands. Instead of selecting one large pump, consider selecting multiple pumps with smaller horsepower. Booster pumps have an impeller that moves water that will come in through the inlet and exits through the outlet. A motor makes the impellers spin. The pumps differ in how they draw the water in and push it out. Some of them use a spinning propeller, others use an oscillating diaphragm or other pump principles.
What do mechanical pressure switches in booster pumps do?
The mechanical pressure switches in booster pumps are used for the direct control/monitoring of safety functions in order to protect pumps with insufficient input pressure against dry running. An example of here is the WIKA PSM-520 pressure switch.
Just how do mechanical pressure switches work?
The pressure element of the switch is a resilient bellow which works against a spring mechanism with an adjustable pre-load force. On the spring mechanism there exists a contact arm for actuating the change-over switch contact. The switch is actuated when the force generated by the pressure in the pressure element is higher than the set pre-load force.
Note
Further information on the various measurement solutions which we offer you for pumps and systems can be found on the WIKA website. For those who have any questions, your contact will gladly assist you to.
Also read our articles
Mechanical pressure switches: So how exactly does one set the switch point?
Mechanical vs. electronic pressure switches: Functionality
Further blogs on mechanical pressure switches

Leave a Comment